Presentation for Boomerang Products

EATON CROUSE HINDS

HAZARDOUS LOCATION FLOOD LIGHT

14 in Stock. ready to ship today.

EATON CROUSE HINDS 

HAZARDOUS LOCATION FLOURECENT LIGHT

24 in Stock. Ready to ship today.

CMP 25 M25  25E1FX1RA

E1FX CABLE GLAND SOLID 1"

Ready to ship today.

AB 400 25 FLA 

120V 50 60 HZ.

Q500T3CL130 

2.5" .25" WPT BTM 0 TO 100 PSI KPA 

Z 2316

CLASS 9007 TYPE BA 1 LEVER ARM 5901

79423 BJ

 Item # 9014000

Paulson Model 3P12-S 

 3Phase® Lift-Front Arc Shield for Shrouds12 cal/cm² 

 Welding cable is a popular portable cord that is used in various welding applications as well as many power supply applications not exceeding 600V where some flexibility is required. Welding cable sizes range from 6 awg to 500 MCM. It consists of bare annealed copper per ASTM B-3. 

 Made from strands of flexible Class copper conductors. Depending on the size of your cable, the number of conductors inside can range anywhere from 2 to 60.  Used in lighter applications, the jack may be made of thermoplastic elastomer (TPE), which can also be used both inside and out, and is resistant also resistant to water and chemicals. 

 This cable type uses PVC/Nylon insulated conductors (i.e. THHN, TFFN, etc.) and has a PVC outer jacket. VNTC Tray cable is a flame retardant multi conductor cable specifically approved for installation in cable trays per article 336 of the NEC. 

 Use in industrial and light- to medium-duty mining applications, heavy-duty service as power supply cable, power cable for mobile and portable electrical equipment at a continuous conductor temperature of 90°C. 

Heavy-duty, portable power cables constructed for use in circuits not exceeding the rated voltage. 

 Durable cable capable of supplying power in temporary or permanent wiring applications, depending on the cable's construction. 

To 35KV. Defined by the International Electrotechnical Commission (IEC) as having a voltage rating of above 1kV up to 100kV. 

 Singlemode or multimode optical fibers and copper gauges from 12 to 22, the Power+ Composite cables utilize a construction that is both plenum-rated for indoor use and also designed for outdoor use, thus eliminating the need to transition from outdoor-rated cable to indoor-rated cable, a requirement of the National Electrical Code 

Diesel Locomotive Cable which is commonly known as DLO Cable is a flexible (tinned copper Class I, 24 AWG strands) rubber insulated (EPR—Ethylene propylene rubber) and rubber jacketed (CPE-chlorinated polyethylene) 2000 volt UL rated cable originally developed for use in the wiring of Diesel Locomotives.

 Thermoplastic Heat and Water-resistant Nylon-coated.  One of the most common single conductor wires used in the United States. ... Sizes 14, 12 and 10 AWG can be either solid or stranded conductors. 

Residential, commercial and industrial buildings and installations for the purpose of power distribution. The cable is manufactured in both copper and aluminum conductors and typically ran in conduit or other approved raceways for services, feeder and circuit wiring 

Marine and offshore technical specification (TS) covering a range of power, instrumentation and earth cables that are halogen free and/or MUD resistant, protecting them against the type of hydrocarbon-laden drilling liquid used in drilling operations which can have an adverse effect on the cable sheathing material. 

 Cross-lined polyethylene and its flame retarding properties are needed.  This cable is referred to as both XLPE and XPTC. 

 Resist the spread of fire into a new area. Fire resistant or fire rated cables are designed to maintain circuit integrity and continue to work for a specified period of time under defined conditions. 

 Used aboard a ship or vessel. ... This can include ocean drilling rigs, submarines, cruise ships, and naval vessels. 

 Including weather resistant connectors, servo  RC connectors, Delphi weatherpack connectors, DIN connectors, header connectors with .008" (2mm), 0.1" (2.54mm) and 0.156" (3.96mm) centers and more.

 Cable Glands attach and secure the end of an electric cable and the device it's connected to, cable glands provide earthing, grounding, insulation, bonding and strain relief. They can also be used to seal cables which pass through bulkheads of gland plates.

 Modular, adaptable sealing and passive fire protection solutions. They are used to create a gas-, smoke-, water- and blast-resistant seal around cables/pipes as they pass through openings in walls, floors, bulkheads or decks. 

 Fully enclosed cable tray made from stainless steel, carbon steel, FRP, aluminum alloy. Channel cable trays have powder coated, hot-galvanized and electro galvanized surface mainly used to support computer cables, communication cables, thermocouple cables and other control cables. 

 Cable ladders are preferred for supporting high volume or heavy cabling, especially if there are long spans between supports. Cable trays are typically used for light weight cable support, in addition to instrumentation and tubing. 

Single Rail Cable Tray is generally used for low voltage and power cables installations where maximum cable freedom, side fill, and speed to install are factors.  

 Solid bottom contained within longitudinal side members. Our solid bottom trough tray is used to carry smaller instrumentation, data communications, computer, telephone, control and fiber optic cable from one location to another. 

Wire mesh cable trays have high strength to support large quantities of network cables. Resist corrosion, heat because of pre-galvanized, hot-dipped galvanized, powder coated surface treatment. Open design makes cables move, ventilate smoothly, decreasing collection of debris, dust.

 Tying bundles of cables together (hence the name) but can also be used for securing cables to poles or other equipment as well as tying wires and cables to the frames of bicycles or unruly plants to garden fences. 

Provides powerful, long-lasting illumination for warehouse lighting, high-bay lighting, low-bay lighting, and wet location lighting. Products include Hazardous location lights, LED flood lights, LED parking lot lights, LED tunnel lights, and replacement bulbs. 

Sealed Receptacles and Plugs Factory sealed construction; no external seals For use on Hazardous or Non-Hazardous Receptacles  

Cost-effective threaded circular SAE-AS50151 connectors for use in harsh environments. These Amphenol MS connectors are sealed to withstand moisture, condensation, vibration and flash-over. 

 Elevators, Kelly Spinner Drill Pipe &  Replacement Parts, Power Tong / Rotary Tong, Slips, Safety Clamps, Brake Lining, Hinge Casing Spiders, HYC Elevators W/ 7-5/8" - 4-1/2" Slip Assy. 

Mud Pump Parts, BOP Parts, Hammer Unions. Ring Gaskets, Casing Scrapers, Diesel Engine Parts, Foster Parts, Hoses, Brake Blocks, Drill Bits & Many More.

safety vest, hard hats, all accessories and Safety & Security gear.

Abrasive, Sealants, Tapes, Chemical, lubricant, and paint, Display Units, Electrical & Lighting, Electrical tools, Fasteners, Clamps, and Straps, Food service Supplies, Handtools, HVAC, Material Handling, Measuring & Leveling, Tools, MRO Supplies, Oil Field, Plumbing Equipment, Pneumatics, Power Tools, Pumps and Welding Supplies. 

Marking Flags, Roll Flagging, Barricade Tape, Aerial Paneling & Targets, Safety Skirts, Underground Detectable, Underground Now Detectable Tape, Pennant Flags, Whiskers, Safety Barrier Fence, Adhesive Tape, Pesticide signs, Danger Tear Flags.

Arc Flash, Industrial, Tactical, Fire, Medical Products. 

Sold by the box of 100 or packs of 5.